Product Specifications
COBRA series specifications
| X-Axis Cutting Stroke mm (in) |
4000 (158″)*
|
||
| Y-Axis Cutting Stroke mm (in) |
2000 (78″)*
|
||
| Z-Axis Stroke mm (in) |
180 (7″)
|
||
| Footprint Width mm (in) |
3360 (132″)
|
||
| Footprint Length mm (in) |
4970 (196″)
|
||
| Accuracy mm (in) |
0.15 (0.006″)
|
||
| Repeatability mm (in) |
±0.05 (±0.002″)
|
||
| Drivers |
AC Servo Motors
|
||
| Motion for X-Axis |
Belt Drive
|
||
| Motion for Y-Axis |
Belt Drive
|
|
X-Axis Cutting Stroke mm (in)
|
8000 (315″)*
|
||
| Y-Axis Cutting Stroke mm (in) |
2000 (78″)*
|
||
| Z-Axis Stroke mm (in) |
180 (7″)
|
||
| Footprint Width mm (in) |
3360 (132″)
|
||
| Footprint Length mm (in) |
10566 (416″)
|
||
| Accuracy mm (in) |
0.2 (0.008″)
|
||
| Repeatability mm (in) |
±0.05 (±0.002″)
|
||
| Drivers |
AC Servo Motors
|
||
| Motion for X-Axis |
Belt Drive
|
||
| Motion for Y-Axis |
Belt Drive
|
| X-Axis Cutting Stroke mm (in) |
10058 (396″)
|
||
| Y-Axis Cutting Stroke mm (in) |
4572 (180″)*
|
||
| Z-Axis Stroke mm (in) |
120 (4.5″)
|
||
| Footprint Width mm (in) |
6300 (248″)
|
||
| Footprint Length mm (in) |
11600 (456″)
|
||
| Accuracy mm (in) |
0.2 (0.008″)
|
||
| Repeatability mm (in) |
±0.05 (±0.002″)
|
||
| Drivers |
AC Servo Motors
|
||
| Motion for X-Axis |
Belt Drive
|
||
| Motion for Y-Axis |
Belt Drive
|
Special Linear Drive Belt in All Axes:
- ATL timing belt is designed for the highest accuracy
- Predictably negative belt length tolerance to allow near
perfect length tolerance after proper pre-tensioning - Larger tension members for the highest tensile strength and spring rate for better repeatability and reduced settling time
- Used with standard AT-Series pulleys (zero backlash pulleys available for highest accuracy)
Cutting with Pure Water:
With pure water cutting, it is especially easy to cut soft materials with this procedure, including paper products, sealing materials, plastics, foams, textiles, carpets, turf, and food. Pure water cutting is extremely precise: the water jet can be finer than 0.2 millimeter and it allows the cutting of fine contours, sharp angles, and tight radii.
Higher Speed and Acceleration:
The COBRA waterjet cutting series has a high cutting speed 0-60m/min with high acceleration to increase production.
Enclosed Cable Track:
High pressure tubing is enclosed in a cable track.
Accessories:
- 5-Axis Head
- Tilting Head
- Drill Attachment
- Auto Height & Anti Collision
- Dual Cutting Head
- Dual Z-Axis Head
- Pneumatic Lifting Arm
- Laser Edge Finder
- Burny Controller
- Abrasive Removal System
- Closed Loop Filtration
- Reverse Osmosis System
- Chiller
- Remote Controlled Pendant
- Water Level Tank
